Esta checklist ayuda a preparar la puesta en marcha de una máquina termo-mecánica para cadenas de aisladores, incluyendo carga, cámara, fixtures, software y aceptación.
Source facts used
- Applicable references include GB/T19519-2004, IEC/TR 60575:1997 and GB/T22708-2008.
- The thermal-mechanical procedure subjects insulator units to four 24-hour heating/cooling cycles.
- The tensile load is specified as 60% of the electromechanical or mechanical failing load according to the cited IEC 383 reference.
- Vertical 2025 models C-TMT-1P/500V to C-TMT-4P/500V cover 1 to 4 workstations with 500kN tensile load.
- A horizontal C-TMT-1P/600H example lists one workstation, 3000 x 1000 x 800mm inner chamber, 5500 x 2000 x 1600mm outer size, 600kN maximum tensile load and 300mm cylinder stroke.
- The brochure describes live time-strength graphic display and programmable processes for different standards and users.
Selection checks
Confirme norma, carga de rotura, porcentaje de carga, dimensiones de muestra y conexiones tipo bola o alojamiento antes del envío.
Commissioning quality checks
Durante la aceptación, revise carga, ciclo térmico, gráfica tiempo-fuerza, alarmas, informes y documentos de calibración como un sistema completo.
Buyer checklist
- Applicable standard and exact thermal-mechanical cycle
- Mechanical or electromechanical failing load
- Workstation count and sample length range
- End fitting drawings and adapter set
- Power, grounding, service clearance and report template
FAQ
Should commissioning use real samples?
Yes. Representative samples help verify fixture alignment, chamber clearance and load holding under realistic conditions.
What should the report include?
It should include sample ID, load trend, temperature cycle, alarms, operator notes and calibration references.